Product Information：
The ball valve has a wide range of applications due to its reliable, fast and complete opening and closing performance. There are many types of ball valves, such as two-way, three-way, and four-way ball valves with different ball holes, as well as single male ball valves, single female ball valves, and double female ball valves. Depending on the purpose of use, you can choose any. The ball valve has fast and precise switching performance due to its simple structure.
The size of the card sleeve ball valve is generally 16 to 20. The general handle has a red disc handle and a red long handle. The color of the ball valve is generally white and yellow, all white, and all yellow.
Performance of ferrule ball valve：
The card sleeve ball valve is simple to install, and its function and function are more stable.
Pay attention to the rationality of installation and ensure better function. Reasonable installation prerequisites should be realized on the basis of selecting the most matching pneumatic ball valve products. It is necessary to ensure that it can bring the greatest convenience to actual management and fundamentally improve management. Normative standards, from function to convenient on-site operation, must be based on installation, so the actual application of ferrule ball valve products requires such a professional foundation guarantee.
Key points of use:
Pay attention to the basic functions of practicality, which bring the greatest convenience to actual production and application. The professional production of ferrule ball valve products also has a good quality premise.
The installation of the card sleeve ball valve is simple and the function function is more stable. In fact, it is not difficult to do it, because in the practice of many professional operation and management, branded valve products have supporting technical services and guidance, so installation specifications With professionalism, there are very good prerequisites and guarantees.
How can the sealing installation of the ferrule joint be ensured?
In order to ensure the installation and sealing of the ferrule joint, first cut the appropriate length of seamless steel pipe with a saw to remove the port burr.
Insert nuts and fasteners on seamless steel pipes.
Pay attention to the direction of the nut and bite, do not install it in reverse.
For the ferrule joint, apply lubricant to the screws and ferrules of the pre-assembled joint body, insert the steel pipe into the joint body, and tighten the nut by hand.
Tighten the nut until the fermenter is stuck with the fermenter steel tube. This turning point can be felt by the increase in the tightening torque.
After reaching the pressure point, tighten the nut 1/2 turn. Remove the pre-assembled joint body and check the insertion of the cutting edge of the ferrule.
During the next installation, the thread of the joint body should be coated with lubricating oil during the actual installation, and the compression nut should be screwed together until the tightening force is increased, and then tighten the ferrule joint 1/2 turn to complete the installation.
