Product Information：
This CPVC Pipe Union is a pipe fitting under the IFAN CPVC series products. It is mainly used for the connection between CPVC pipes and pipes, pipes and pipe fittings. The CPVC Pipe Union is connected with the matching PVC glue, which is milky white and has a glossy surface. But the section doesn't.
Product Size：
Size | PCS/Box | Weight（g） | CBM |
U1/2 | 600 | 27 | 0.040 |
U3/4 | 350 | 44 | 0.040 |
U1 | 200 | 79 | 0.040 |
U1-1/4 | 120 | 102 | 0.040 |
U1-1/2 | 72 | 136 | 0.040 |
U2 | 45 | 260 | 0.040 |
Product Features:
Before connecting the CPVC Pipe Union and the pipe, the dirt on the outside of the pipe socket and the inside of the rubber ring should be clear to facilitate the connection and prevent water leakage. In order to make the pipe easy to be inserted into the socket, a small amount of soapy water or lubricant can be applied to the inside of the rubber ring and the outside of the entire socket to facilitate installation.
When using PVC glue to connect CPVC Pipe Union and pipe fittings, how to dissolve the glue? If the clothes are accidentally stained with PVC glue, you can pour some insulating oil on the PVC glue position. The insulating oil can soften the PVC glue more, so that it can be cleaned quickly. You can also directly put the clothes in the freezer of the refrigerator for freezing. Generally, after 2 hours, the PVC glue will be solidified and can be easily torn off. You can also drop some PVC glue directly on the PVC glue position, so that the cured PVC glue on the clothes can be dissolved, and then just use clean water to rinse the PVC glue. If the area of the PVC glue is relatively small, then as long as the clothes are soaked in hot water, the PVC glue can generally be dissolved. If the area of the PVC glue is relatively large, you can apply some acetone solution on the position of the PVC glue, wait for about 15 minutes, let the PVC glue be dissolved, and then clean it with water.
