Product Information：
Slide tight type pipe structure is compact, includes only the pipe ontology and sliding card sets, sliding tight fitting tee has two kinds of materials, a kind of for the brass material, a kind of is the material PPSU, generally two kinds of color and black color for brass, USES the fasteners, threaded connections, the longer length, never leak, size from 16 mm to 32 mm, main application for expanding tube, pex pipe, etc.
Installation points:
The installation of the sliding pipe fitting is simple, and the construction personnel only need to follow the following installation steps to complete the installation of the pipe fitting.
1. Cut the pipe and insert the sliding clamping ring
According to the actual length required by field measurement and the length required by pipe fittings, cut the pipe with pipe cutting scissors to ensure that the fracture is perpendicular to the axis of the pipe, and remove burrs and flying edges.And the next step before the implementation of the clamp ring.
2. Expand the pipe mouth and insert the pipe fitting body
Insert the special tool expander into the fracture of the pipe and expand the pipe opening.In the process of expansion, it is necessary to rotate the pipe fittings and reaming from multiple angles to make the fracture of the pipe uniform and fully expanded.In order to achieve the best effect of tube expansion, the expansion force should be small to large step by step.The connecting part of the fitting body is then pressed into the expanded orifice.
3. Push the sliding clamping sleeve, and the installation is complete
First of all, the corresponding insert is set on the special tool gun, so that the sliding clamp sleeve and the pipe fitting body contact with the insert on the tool gun, and the handle of the tool gun is pressed, and the sliding clamp sleeve is pushed to the pipe fitting body until the two are closely connected and the installation is completed.
