Product Information：
This Faucet With Shower has a three-stage water outlet design. The concealed faucet outlet is unique. The shower has a three-stage faucet switch to control the three outlet channels of the top nozzle, the hand-held nozzle, and the lower outlet; the second and third levels of water distribution refer to freedom. Switch the hand-held shower, bathtub spout, and top spray to switch the three water outlet positions; the lifting water divider is a general shower with two switching modes of hand-held shower water and top spray water.
Product Size：
Size(mm) | PCS/CTN | Weight(g/pcs) | CTN SIZE |
D04 | 12 | 1143 | 0.106 |
Product Features:
The shower faucet is the drain valve of the tap water pipe, and the sanitary device that controls the flow of cold and hot water is opened or closed through a rotating device. Common sizes on the market are eight inches, four inches, etc.
The humble Faucet With Shower under the shower head can directly determine the quality and service life of the shower. Therefore, pay more attention to the maintenance and cleaning of the shower faucet to extend the service life of the shower faucet and save money.
The single handle faucet should be turned on and off slowly during use, and the double handle faucet should not be closed too tightly, otherwise the stopcock will fall off, causing the water to be turned off and unable to stop; the wall-mounted shower faucet is generally It is more prominent, so be careful not to bump or press it when handling objects. Especially the surface plating of imported faucets of some brands is quite thick and cannot withstand the impact or abrasion of hard objects. Therefore, when using, avoid contact with hard objects such as rings to avoid fatal injuries; when the water pressure is not less than 0.02mpa If the water output is reduced, it may be blocked in the faucet. The solution is to use a wrench to gently unscrew the faucet screen cover at the water outlet of the faucet, clean the impurities, and then install it carefully. Can be restored as before.
The ideal cleaning technique is to rinse the faucet with clean water, and then use a soft cotton cloth to dry all the water on the metal surface of the faucet, because the water will form scale on the metal surface after the water evaporates. Wipe gently, do not rub it vigorously, use a moistened sponge and Dry the soft skin to make the faucet radiant; if a lot of cleaning is required, it is best to use a mild liquid glass cleaner, or acid-free, non-abrasive soft liquid and completely dissolved powder, non-friction solution polish Can remove the rough mask and accumulation on the faucet; do not use any abrasive cleaners, cloth or paper cloth, and any acid-containing cleaners, polishing abrasives or rough cleaners. After cleaning, please use clean water to remove all the lotion and dry it with a soft cotton cloth.
