Shower Angle Valve

Product Information：

This Best Shower Valve is a common shower valve in bathroom. It saves more water and space than bath tubs, and is more in line with the concept of environmental protection. In places where bathtubs are inconvenient to install in public baths and changing rooms, the Best Shower Valve is the first choice.

Product Size：

Detailed steps to replace the spool of the shower head:

Before operation, you must close the tap water, solar, and water heater valves, open the basin faucet to let in cold and warm water, and test whether the valves are tightly closed and do not leak.

Tilt down the decorative cap of the handle, loosen the screw, and remove the handle (be careful that the screw is loosened and lost, the handle can be taken off about one or two turns); twist off the decorative cover (a little effort is required); remove the gland nut ; Take out the valve core; lightly open the water valve, flush the valve body with water flow to remove impurities; replace the new valve core (positioning must be accurate), the installation surface must be clean and free of debris; install the gland nut, the tightness must be moderate ( If the leaking water is loosened, it will be inconvenient to disassemble next time); turn the valve core adjustment lever clockwise until it stops (hot water position); install the handle according to the hot water position; tighten the screw and press the decorative cap , The spool is successfully replaced.

What to do if the switch valve of the shower head fails

If the spool of the shower switch valve is broken, we'd better buy a spool of the same brand and model to replace it; then prepare a screwdriver, needle-nose pliers, knife and other tools; before replacing the spool, first turn the faucet Turn off the water source of the faucet; then find the plastic cap of the faucet, use a knife to pry it off, and then use a screwdriver to remove the screw in the hole, so that the handle of the faucet can be removed. After removing the handle of the faucet, We can see the spool; the spool is usually fixed by a clip. You can use needle-nose pliers to clamp the claws of the clip, rotate it clockwise to remove the clip, and finally, replace it with a new one. The spool can be reassembled. If the shower is still under warranty, you can call the decorator to repair it.