Butterfly Handle Valve

Product Information：

Butterfly Handle Valve can be used to cut off or connect the medium, and can also be used for fluid adjustment and control.

This Butterfly Handle Valve is a copper ball valve, but its core is an iron ball, the body is two-color (silver body with gold rim), and the handle is a butterfly-shaped aluminum handle with an external thread.

Product Size：

Or do you have to choose one of the two toilet angle valves and ball valves?

In the case of the same grade, the ball valve is more expensive than the angle valve, and the water flow of the ball valve is larger than that of the angle valve. The ball valve is used in the water heater, which has little effect on the flow. The angle valve in the other branch outlets can meet the requirements of use without excessive flow. If you have a budget, you can use the ball valve completely, and you can adjust the size of the water through a switch.

Regardless of whether the angle valve or the ball valve, stainless steel or copper should be used as much as possible, because the environmental humidity of the valve is high, stainless steel or copper is more suitable.

Where there is a requirement for water flow, such as gas water heaters, kitchen faucets and the like, ball valves are recommended. Now there are right-angle ball valves. The installation appearance is very similar to that of angle valves. Unlike the past, there were only straight-through ball valves, which cannot be used in many places.

Except for places that require frequent switching operations (several times a day, even frequent switching), and places where the water pressure is too large and splashing, ball valves can be considered in other places. The water volume is large, the water pressure loss is small, and it is easy to wash. Moreover, the ball valve is not as easy to break as imagined. As long as it is not turned on and off dozens or hundreds of times a day like a faucet, the occasional switching operation is a kind of maintenance for the ball valve.

For high floors without secondary water supply, it is recommended to give priority to ball valves, because angle valves are used when the water pressure is low, and some facilities, such as gas water heaters and thermostatic showers, cannot reach the starting water pressure.