Product Information：
The filter is an indispensable filter device for the piping system of the conveying medium, and the Ball Valve Filter is an indispensable device for the ball valve. With this device, at least the water flowing from the valve can be further improved.
Product Size：
Size(mm) | PCs/Box | Weight(g) | CBM |
1/2 | 240 | 6.3 | 0.025 |
3/4 | 192 | 8.4 | 0.025 |
1 | 192 | 14.3 | 0.025 |
1-1/4 | 90 | 17.3 | 0.025 |
1-1/2 | 66 | 24.9 | 0.025 |
2 | 42 | 42.2 | 0.025 |
2-1/2 | 100 | 116 | 0.025 |
3 | 100 | 146 | 0.025 |
4 | 100 | 246 | 0.025 |
How to clean the Ball Valve Filter on the heating pipe?
The first step:
Be sure to close the inlet and outlet heating water valves from the main pipe before removing the filter. The heating filter is between the heating meter and the heating water inlet valve. About 10 cm from the front of the heating meter, you will see a oblique downward plug, and a heating filter is installed inside.
Step 2:
Find the filter and use a wrench to unscrew the water.
Step 3:
Remove the filter and clean it.
Step 4:
Reinstall the cleaned strainer back into the pipeline, and wrap the raw material tape when tightening the valve to prevent water leakage. If the filter is severely clogged, it should be cleaned once every 15 days. If the condition is good, it can be cleaned once a month to ensure the smoothness of the pipeline.
