Construction specifications are a very important part of the bonding of PVC plastic flooring. Appropriate use of glue: The glue must be operated in accordance with the manufacturer's instructions, and the recommended type of hand shovel with serrations should be used to apply the glue, and it must be applied evenly. If the glue application amount recommended by the manufacturer is not followed, the glue cannot fully play its role in sticking to the PVC floor. If there is not enough time for the glue to evaporate, there may be moisture or solvent residues in the glue, which may also cause bonding failure.
Rolling: A 50kg steel pressure roller should be used to evenly roll the entire surface of the floor to compact the plastic floor. Roll it at least twice, roll it immediately after installing the floor, and roll it again within half an hour or one hour after the floor is installed. Because the final adhesion of the glue is half an hour later, the PVC plastic floor has properties. Before it is fully adhered, there will still be some bulging phenomena, so it needs to be rolled again to make the PVC plastic floor good Glue bonding. Use rolling to compress the back of the floor and the adhesive to ensure that there are no bubbles on the floor, and the PVC plastic floor is well bonded. The floor needs to be rolled outward from the center of the PVC plastic floor.
