In today's home improvement, many people choose the water heater hose when they install the water heater, but many people don't know much about the installation method and skills of the water heater hose. When installing the water heater hose, it should be considered: the bending of the hose should not be less than the minimum bending radius of the hose, rough surfaces or sharp corners will cause wear on the hose, and the total length of the hose should be able to ensure that both ends of the hose are Potential movement; hose twisting should be avoided, and the correct installation method should be used when the moving parts may cause twisting to avoid; if the bending radius is too small, a reasonable joint form should be selected, avoid installation smaller than the minimum bending radius, and do not install at a distance from the sleeve. Begin to bend the hose within the range of 1.5 times the inner diameter; external damage: avoid contact with objects that may cause wear or damage to the cover. When applying to a moving state, please pay special attention to setting the length of the hose to avoid tension or wear.
