First, turn off the water source and power supply at home, unscrew the water pipe joint, check where the source of the water leak is, and then carry out targeted maintenance. Water pipes will be aged and damaged over a long period of time, and it is normal for water leakage to occur at this time. If it is found that the drain joint is leaking after inspection, you can first cut off the end of the broken water pipe, buy a new water pipe and install it in line with the original drain joint, replace the original broken water pipe, put it into the original water pipe, and use glue Apply it to ensure that the old and new water pipes can be tightly bonded. Sometimes the water pipe joint leaks just because the water pipe joint is loose, which is easier to solve. Find the loose water pipe joint, first confirm whether the water pipe joint is damaged, if it is intact and only loose, you can continue to use it, and directly use the relevant tool to tighten the loose part of the water pipe joint. After inspection, it is found that the water pipe joint is leaking due to cracks or more serious damage. First consider whether it can be repaired with glue. After repairing, the damaged part can be repaired with cement, waterproof glue, etc. If it cannot be repaired, it is necessary to purchase new water pipe joints and replace the old water pipe joints for reinstallation. Water pipe joints that are often exposed to direct sunlight or outdoors are easy to freeze and crack in winter, and are likely to leak in spring. At this time, you can choose a protective film that can keep warm to wrap the water pipe joints to reduce the impact of weather changes on outdoor water pipe joints. When checking for water leakage, it is best to turn off the water gate and power supply to avoid electric shock. If you find the leak, first wrap the leak with tape to prevent the water from spreading. Absorb the water from the floor, wall, etc. near the leak and wipe it clean to avoid affecting the floor, wall and even furniture.
