Installation steps of the wall-mounted faucet: Before installation, please turn on the water source, remove impurities, sand, etc. in the piping, and then turn off the water source. The main purpose is to prevent impurities in the water pipe from affecting the normal water supply after the faucet is installed; cover the flange Lock into the teeth of the water inlet elbow, then wrap the teeth with raw material tape, lock it into the wall piping, adjust the hot and cold water inlet elbow, rotate the angle to be flush and the hole distance is the same as the main body cold and hot water inlet hole distance In the same way, rotate the flange cover against the wall, mainly for the purpose of fixing; insert the rubber gasket into the connecting nut of the hot and cold water inlet of the body, and then connect and lock it with the cold and hot water inlet elbow. Precautions for installation of wall-mounted faucets: Before installing the faucet, make sure that the water pressure is between 0.5-5kg/cm, so as to ensure the normal water supply of the faucet after installation; before disassembling the faucet body, please close the water inlet elbow (water source), And disassemble carefully to prevent damage to the faucet; do not touch the water outlet when using the faucet to prevent burns.
