The water separator in the floor heating system is mainly responsible for the opening and closing of the water flow in the floor heating loop. When the water in the gas boiler flows into the manifold through the main pipe, the impurities are separated by the filter, and then the water is evenly distributed to the loop After the heat exchange, it returns to the water collection back to the main bar, and then flows into the heating system from the return water outlet.
The experiment uses the azeotropic mixture distillation method, and uses a water separator to continuously flow the organic layer above the water layer produced by the reaction back into the reaction flask, and remove the water produced. Before the experiment, add water to the branch pipe in the water separator and then put Xml water, that is, there is (V-X)ml water in the water separator. Start heating with a small fire, keep the liquid in the bottle slightly boiling, start to reflux, and control a certain (experimental temperature). When the water trap is completely filled with water, the reaction has been basically completed, and the heating is stopped. Mainly used in chemical experiments to separate the water produced by chemical reactions. Since the water produced by chemical reactions will affect the reaction or make the reaction impossible when water is present in the reaction system, the produced water needs to be azeotropically boiled with water. The reflux of the solvent brings the water out, so that the reaction can proceed. Usually, toluene and water are used to azeotropically take away the water produced by the reaction.
The water separator plays a role of splitting. 1. When there are many pipelines, if too many three-way, four-way and other accessories are used, the energy loss of the system is very large. 2. It is convenient for users to operate. When the water separator is adopted, the pipeline direction is clear and easy to operate. 3. Convenient for maintenance. The interfaces on the manifold are all flanged. It can be said that the purpose is to facilitate disassembly and maintenance. 4. Reduce system pressure difference.
Generally, the manifold is mainly composed of three parts: the manifold, the collector and the fixed bracket. The function of the water separator is to separate the hot water from the heat source into the pipes laid by the ground radiant heating of each road, so as to realize the purpose of heating and adjusting the temperature of the room. The water collector collects the low-temperature water in each channel after separate heat dissipation, and fixes it to the wall or the ground.
