There are two main reasons for the rupture of ppr pipe fittings
1. It is due to improper human operation. When installing standardized external fittings, wind a suitable raw material tape counterclockwise on the outer threaded parts such as faucets and valves, and then bring it into the ppr inner wire pipe fitting. The raw material tape should not be too much, and then tighten it with a pipe wrench or wrench. For the faucet, it is advisable to expose 2-3 wires on the outer thread of the valve. If the outer wire is not exposed when tightening, it means that the raw material tape is not wound enough. Cause the inner wire of the pipe fitting to twist.
2. The quality of the inner bending products of ppr pipe fittings is poor. Some low-quality ppr pipe fitting brands and manufacturers will use inferior recycled sanded copper for production. The ability to cut corners.
IFAN has 30 years of pipeline experience and uses imported Hyosung raw materials, welcome to contact us.
