Brass Adapter Fittings

Product Information：

Brass Adapter Fittings are made of brass, with a long service life, with a diameter from 1/2 to 1mm, and a variety of lengths to choose from, with a wide range of applicability;

The surface of Brass Adapter Fittings can be polished to support private customization such as logo and packaging;

Customized support: OEM, ODM, Certification: ISO, CE, so that buyers can use it with more peace of mind.

Product Size：

What is a threaded connection?

In the construction of pipeline engineering, different connection methods should be selected according to the material of the pipe used. Ordinary steel pipes have threaded connection, welding and flange connection; seamless steel pipes, non-ferrous metal and stainless steel pipes are mostly welded and flanged; cast iron pipes are mostly connected by sockets, and a few are connected by flanges; plastic pipes are mostly connected by threads , bonding and hot-melt connection, and other non-metallic pipe connections have many forms. There are three ways to connect pipe thread: cylindrical internal thread into cylindrical external thread, cylindrical internal thread into conical external thread, and conical internal thread into conical external thread. The connection of the latter two methods is tighter. , Is the commonly used connection method. And this Brass Adapter Fittings is a threaded connection.

What should I do if the water pipe joint leaks?

Water pipe joints are an important part of connecting water pipes. Water pipe joint leakage is different from water leakage in other parts of the water pipe. Usually, it cannot be repaired and can only be replaced with a new water pipe joint. Generally speaking, the water pipe joint can be solved by yourself, or you can ask a dedicated maintenance person to deal with the problem.

If the water pipe joint is leaking, remove the original joint first. If it is difficult to disassemble due to rust, a hacksaw can be used. Without touching the thread of the water pipe, make an incision, and then use a pipe wrench to unscrew it.

If the rubber pad is old or not available, you need to replace it with a new one, apply a thick layer of white paint on the silk opening, wrap it with hemp silk (or raw material tape), and then install it.

If there is water leakage at the handover or fusion joint, it is difficult for the owner to solve it, so it is best to ask relevant professionals to help.

Causes and solutions of water heater leakage:

Reason: In addition to water leakage in the body, leaks in pipes, mixing valves and safety valves are also prone to failures, which can be solved by replacing parts. However, if the body is leaking, the reason may be that the inner bladder is ruptured and cannot be used normally.

Solution: Go to the plumbing accessories store to buy a cold water valve that matches the water inlet pipe joint of the electric water heater. Turn off the main valve of the tap water, unscrew the joint of the hose, and replace the valve you just bought to check that there is no water leakage at the joint; when heating the water heater, turn off the newly replaced valve, please rest assured that the water heater box is at this time There is already a tank full of water, which will never dry the water heater. Open the valve every time you use the water heater, and turn off the valve when you don’t usually use the water heater. Make sure that the water pressure on the wall of the water heater is the lowest. This is safe.

The heating system is the key to the safety and high efficiency of instant electric water heaters. Leakage of electricity is the key to the solution of the core heating technology of the thermoelectric water heater. The safety detection of the anti-electric wall, the line control system, the leakage protection function and the external leakage protection switch also play a certain role, but it is more of a symptom. No cure. However, modern people's requirements for the safety of home appliances are to be 100% safe at home, so how to solve the safety problems of instant heating system leakage, electricity leakage, scale, dry heating, etc. has become the top priority in the electric water heater industry.