Product Information：
This Brass Seated Female Elbow is one of PEX fittings, which belongs to Brass Fitting in PEX fittings. IFAN’s PEX pipe Brass Fitting has five molds. This Brass Seated Female Elbow uses IFANPLUS molds, which is also the best one. Compared with other molds of the same type, the color is brighter, the price is higher, and the quality is more excellent.
Brass Seated Female Elbow has three components: nut, white sealing ring, and copper snap ring. From the appearance point of view, it has two ports, one end can be directly connected to the PEX pipe, and the other end has an internal thread, which can be directly connected to other pipes or fittings through the thread. At the same time, the other side is opposite to the threaded end. With a fixed seat, this fixed seat can effectively prevent the collapse of the entire pipeline system caused by the loosening of the pipe fittings, and plays a vital role in the pipeline system. Look at the appearance of the Brass Seated Female Elbow. The words "made in ifan" and "ifanplus" are engraved on its wall, as well as the specifications and models of the product.
Product Size：
Size | PCS/Bag | Weight（g） | CBM |
ZL16×1/2"F | 160 | 120 | 0.025 |
ZL18×1/2"F | 120 | 200 | 0.025 |
ZL20×1/2"F | 120 | 232 | 0.025 |
Steps to install the shower head holder:
First prepare the copper joint (a copper joint is a joint with threads on both ends), wrap the thread with a raw material tape, and then connect it to the pre-embedded outlet pipe joint.
Assemble the main canopy and shower faucet, and wrap the threads with raw material tape. Mark the position where the shower rod needs to be fixed on the wall. This position is where the fixing seat is installed. Drill holes in this position, and then install the nylon anchor bolts, the same structure screws to install and fix the fixing seat.
Install the shower rod and shower faucet on the fixed seat, and adjust their horizontal position and stability. Note that the joint behind the faucet should be sealed with a gasket, otherwise it is easy to leak water.
After the shower rod is installed, you can fix the shower head on the elbow. The installation of the shower head is the last step of the shower installation. The installation of the shower head is very flexible and can be removed at any time.
