Multilayer Pipe Press Fittings

Multilayer Pipe Press Fittings, seated female elbow, PEX press fitting, water supply, cold and hot water system, 16-32mm, BSP or NPT standard thread, DIN8077/8088

Advantages
1. The connection is reliable and safe;
2. The construction is convenient and fast;
3. Suitable for embedded installation;
4. Maintenance-free and update-free, with superior economic performance.

Attention
If the piping is not bent properly, please correct it at the straight pipe. Do not make corrections to the pipe fittings. The place responsible for the compression may be loose. This is also the cause of leakage. Please pay attention.

1. If there is any slack in the clamping position, press it again at the original clamping position (pay attention to align the hexagonal direction).
2. When the piping system is used for media other than water (such as oil, chemical agents, gas, etc.), please contact the manufacturer for discussion. The rubber sealing ring may be corroded by the medium and swell and damage, which may cause leakage.
3. Anti-corrosion measures should be considered when the pipeline system is used near the coast or in places with a lot of salt water. In addition, be careful when used in well water, sea water, hot spring water, and fluids with high salt content.
4. When using hot water, if the water source is untreated well water, consider whether it will have an adverse effect on the piping, please pay attention to it

Other products

FAQ

1.It is possible to get sample from your factory?

Yes, free samples will be sent if needed, but the freight can be negotiated or charged. It will be refunded after conformation of the order.

2.How many years the products guarantee?

PPR is more than long-term durability according to standards, PEX pipe 30 years, and others will be told you

3.Can your factory produce the low-lead brass products?

We also can produce the low-lead brass products according to your requirement of lead content.