Product Information：
This Brass Press Fittings is a compression-type seated pipe fitting elbow, which is mainly composed of the inner wire connection nozzle, the compression nozzle, the outer teeth of the tube wall, and the connection base. The inner circular surface of the inner wire connection nozzle is provided with a thread. It can be connected with the pipe that has been tapped through the port. The inner wire connection nozzle and the compression nozzle are designed with a 90° bend angle, and the compression nozzle is provided with three sets of external teeth on the tube wall, and a groove for placing a rubber sealing ring is arranged between the external teeth of each two sets of the tube wall. The Brass Press Fittings clamp-type seated pipe fitting elbow is also designed with a connecting base, which is arranged at the lower part of the inner wire connecting pipe mouth, and is designed with three connecting screw holes.
Product Size：
Size×Thickness(mm) | M/Bag | Weight（g） | CTN SIZE(cm) |
ZL16×1/2F | 110 | 92 | 0.011 |
ZL18×1/2F | 100 | 95 | 0.011 |
ZL20×1/2F | 90 | 104 | 0.011 |
Product Features:
The bearing seat is mainly used to fix and support the rotating shaft. Its convenience is that the angle and height of the rotating shaft can be adjusted at will, the space is small, and no box support is required. The seated bearing consists of an outer spherical ball bearing with seals on both sides and a cast (or stamped steel plate) bearing seat. The internal structure of the seated bearing is the same as that of the deep groove ball bearing, but the inner ring of this type of bearing is wider than the outer ring. The outer ring has a truncated spherical outer surface, which can automatically adjust the center when matched with the concave spherical surface of the bearing seat.
Generally, there is a gap between the inner hole of this kind of bearing and the shaft, and the inner ring of the bearing is fixed on the shaft with a jack wire, an eccentric sleeve or an adapter sleeve, and rotates with the shaft. The bearing with seat has compact structure, convenient installation and unloading, perfect sealing, suitable for simple support, and is often used in mining, metallurgy, agriculture, chemical industry, textile, printing and dyeing, conveying machinery, etc.
