Specification
| Products Name | Press to PEX adapter |
Kind | female thread |
another name | PEX press coupling, socket, straight fitting |
packing | 20 pieces for 1 opp bag, then packed by color carton |
Delivery time | within 30-45 days after receiving 30% deposit of T/T |
OEM | acceptable, just up our MOQ, and sent us message if wanna know more details |
type | female, male, socket, elbow, tee, manifold... |
"Press-in type" connection and performance advantages:
1. Reliable and safe connection: The ""pressing" connection has high strength and good vibration resistance. The connection part is made "dead" at one time to avoid the possibility of loosening of the "live joint".
2. Convenient and fast construction: avoid on-site welding, threading or rolling groove operations, as long as the use of special hydraulic tools, the compression connection can be easily completed, only 5 seconds, saving time, labor, cost, and a successful installation The rate is high.
3. Good sanitation and environmental protection performance: the pipe fittings are made of carbon steel galvanized material, and the sealing ring is made of EPDM rubber, which has good sanitation and environmental protection performance and long service life.
Characteristic
Thicker materials, smooth sanding: smooth inner wall, low friction coefficient, light weight, large flow, not easy to corrode, good heat resistance
Convenient installation and stable performance: the material selection has good welding performance, the pipe fittings can be connected by hot melt and electrofusion, easy to install, and the joint is firm
Complete certificates, sanitary and reliable: pipe fittings can be used not only for cold and hot water pipes, but also for pure drinking water systems, with complete inspection certificates
Installation step
Pipe cutting: cut the pipe according to the design drawings or actual needs on site
Remove burrs: After the pipe is cut, use a Remove burrs device to remove burrs from the mouth of the pipe, otherwise the burrs will scratch the sealing ring
Illustration line: Before installation, insert the burr-removed pipe into the inspected pipe, insert the pipe to the end, and draw a positioning line on the outer edge of the pipe. After pulling it out, compare and check whether the socket is in place.
Clamping tool: After accepting the illustration line, use professional tools to install the clamping
Check: After the compression is completed, check whether the finished product is abnormal.
