PEX C Pipe

Product Information：

This PEX C Pipe is made of PEX-C raw materials. PEX-C uses electron beam stirring technology, mixing is more uniform, resistant to low temperature, high temperature and pressure. The PEXc raw materials used by PEX C Pipe can be mainly used for floor radiant heating, cold and hot water systems, pure water delivery systems, solar hot water systems, and the transportation of various chemical fluids.

Product Size：

Selection of radiator (radiator) pipe material:

Pipes and fittings must be hygienic, non-toxic, non-polluting, etc.; the heat resistance of pipes and fittings must be able to be used at a water temperature above 95℃ for a long time, and the short-term use temperature can reach above 110℃, and the expansion and expansion coefficients should not be large; Pressure resistance, must be able to use above 10bar water pressure for a long time, and have high strength, no leakage, no rupture, etc. ④The pipes and fittings should be corrosion-proof and non-scaling; the pipes should have good heat preservation effect and low thermal conductivity; the inner and outer walls of the pipes and fittings should be smooth, with low water resistance, soft color, and beautiful appearance; hot-melt connection should be adopted, and the installation should be convenient and reliable; The nominal pipe diameter of pipes and fittings should meet certain manufacturing standards and versatility. The general pipe diameter here is DN20/25; the design flow rate of the pipe should not be too large, and the water velocity of the pipe inner diameter should not be greater than 0.8～1.0m/s. Larger is unfavorable to the system resistance, and the flow rate is too small to increase the cost of the system, so comprehensive consideration should be given to the selection.

The heat dissipating equipment with "packing" mainly affects the heat conduction, convection and radiation effects, and also affects the heating effect of Qingdao radiator. After testing, it is found that the room temperature with "packing" is about 3℃ different from the room temperature without "packing". . In addition, the "packed" radiator cannot be detected in time for heating facilities failure and inconvenient for inspection and repair. If the interior is to be decorated, in order to facilitate the maintenance of the heating equipment, it is recommended to use the overall mobile decorative cover or not to use the best.