Product Information：
The Face Basin Faucet is a concealed wash basin faucet. The concealed wall-mounted faucet is to pre-bury the main water supply components of the faucet in the wall. The wall is mainly reserved for switches and water outlets. Therefore, there are more free choices in the shape and make different spaces and environments more free、diversified choices.
In short, exposed installation is what we usually call normal installation. Concealed installation means burying some parts in the wall, as if it is invisible. Later, we will introduce how to conceal the Face Basin Faucet.
Product Size：
Size(mm) | PCS/CTN | Weight(g/pcs) | CTN SIZE |
D14 | 12 | 1746 | 0.065 |
Installation tips for concealed Face Basin Faucet：
When buying a single-handle basin faucet, you should pay attention to the diameter of the drain outlet. At present, most of the market has a hard pipe for water intake. Pay attention to the reserved water pipe height. It is best to go down from the basin to about 30. During installation, a special angle valve must be selected, and the angle valve must be fixed to the hot and cold water pipes out of the wall. If there is a distance between the angle valve and the water pipe on the faucet, you need to purchase a special pipe to extend the connection. Do not use other water pipes to connect, otherwise it will leak or fall off due to high water pressure. If the inlet pipe is too long to exceed the outlet pipe, just cut off the excess part.
Installation of concealed basin faucet Before installing the thermostatic faucet, first check which side of the water pipe is cold water and which side is hot water. Pay special attention not to connect the hot and cold water pipes wrongly, so as not to affect the future work of the faucet. Gas and solar water heaters cannot use thermostatic faucets, mainly because the water pressure is too low. The installation of thermostatic faucet also requires the installation of hot and cold water filters.
Precautions for the installation of the concealed Face Basin Faucet:
Installation of shower and bathtub faucets If you purchase shower, bathtub, or wall-mounted faucets, you need to choose a suitable height to bury the water pipe. The distance between the hot and cold water pipes is about 20 or more. Flush the water pipe before installation to avoid damaging the faucet due to hard water.
Concealed shower and bathtub faucets After purchasing a concealed basin faucet, the valve core of the faucet is generally pre-buried in the wall. Before embedding, consider the thickness of the bathroom wall. If the wall is too thin, the spool will not be embedded. Do not remove the plastic protective cover of the valve core easily during pre-embedding, so as to avoid damage to the valve core by cement and other chores during pre-embedding. In addition, you should pay attention to the up and down, left and right directions of the spool when embedding the spool, so as not to embed the spool incorrectly.
The installation of the concealed basin faucet has a high frequency of use in the kitchen, and it is easy to loosen when moved around. All requirements for stability are taken for granted, so the lock nut must be tightened.
