Wash Basin Tap Hot And Cold

Product Information：

The Water Tap For Wash Basin is a concealed wash basin faucet. The concealed wall-mounted faucet is to pre-bury the main water supply components of the faucet in the wall. The wall is mainly reserved for switches and water outlets. Therefore, there are more free choices in the shape and make different spaces and environments more free、diversified choices.

In recent years, with the continuous improvement of our living standards and aesthetic standards, under the influence of "exquisiteism" and minimalism, Water Tap For Wash Basin has begun to no longer be limited to the previous star-rated hotels, and has gradually become widely used. Accepted by the market. Therefore, concealed faucets are still relatively novel products in the country. Concealed faucets are basically made of copper, because this is determined by the characteristics of concealed faucets that need to be embedded in the wall.

Product Size：

Product Features:

Concealed basin faucet, the specific products are single-handle and double-handle!

The so-called single-handle means that the heat and cold are integrated in one switch for control, and one switch can already adjust the size and temperature of the water flow; the double-handle means that the heat and cold are independent switches, and the cold and heat have their own switches. From the perspective of domestic usage habits, there are generally more single-handle wall-mounted basin faucets, which are very simple to operate and convenient to adjust the temperature of cold and hot water.

Double-handle is generally more popular in North America, cold start saves resources, but is it easy to adjust the temperature of hot and cold? If it is not used for a long time, it may be scalded by hot water.

Two mainstream concealed faucet processes:

Gravity casting process: This term is a bit professional. Simply put, it is to make an abrasive tool, burn the copper ingot into copper water, and pour it into the abrasive tool with a sand core (the role of the sand core is the pipeline waterway in the embedded part) After cooling, knock out the sand core and it is basically completed. It has the characteristics of high density and anti-permeation. The disadvantage is that it is high in cost and is only suitable for mass production. The characteristic of the product is that the inner wall looks bumpy because of the sand core, and the aesthetics is not strong.

The forging process, in simple terms, is to use a copper block to heat and then forge it into the desired model, and then process it. It has the characteristics of low cost and flexible production. The shortcomings of this process are a bit obvious: forging uses the ductility of copper. If the copper is not marked enough, there are many impurities, and the heating is uneven, it will lead to internal cracks in the product. The characteristic of the product is that the inner cavity is very smooth.