With the improvement of people's living standards and the emphasis on health, more and more people have installed women's washers in the bathroom. Bidet Sprayer Set is a sanitary ware product specially designed for women, mainly for women to clean private parts. But the women's washer is a new type of product after all. Many people don't know how to install the Bidet Sprayer Set. Let's learn about it with IFAN.
Installation steps for the Bidet Sprayer Set
Because the product itself does not contain any technical content, the installation is also very simple. Generally there are the following steps:
1. Align the Bidet Sprayer Set sewage outlet with the sewer inlet and straighten the bidet. Mark the installation holes, remove the bidet, drill holes at the marked places and put in expansion bolts.
2. Install the Bidet Sprayer Set faucet and drain.
3. Connect the sewage pipe and insert it into the sewage outlet.
4. Apply glass glue to the bottom edge of the Bidet Sprayer Set.
5. Align the expansion bolts to fix the Bidet Sprayer Set on the ground.
6. Apply glass glue in the decorative cap and clamp it on the bolt.
7. Install the angle valve and drain the water to flush out the residue in the water inlet pipe.
8. Connect the angle valve and the bidet faucet with a hose.
9. Test flushing, if there is no abnormality, it can be used.
Bidet Sprayer Set Installation Precautions
1. Before installation, wall and floor tile construction should be completed, and water inlet pipes and sewage pipes should be reserved.
2. The Bidet Sprayer Set should be installed on a hard and flat ground, the ground must be cleaned up, and the drain pipe connected to the female washer should be set with a water trap.
3. The sewage outlet of the Bidet Sprayer Set should be aligned with the inlet of the sewer pipe, and glass glue or sludge should be applied to the joint to ensure that the sewage does not overflow outside the pipe.
4. When the installation hole of Bidet Sprayer Set is fastened with expansion bolts, it should not be too tight to prevent damage.
5. The bidet cannot be installed with cement.
6. When using, do not put easily blocked objects into the bidet.
7. Avoid violent impact during installation and use.
