Product Information：
Auto Soap Dispenser Container is also known as soap dispenser Container and soap dispenser. It is characterized by automatic and quantitative hand sanitizer. This product is widely used in public toilets. It is very convenient and hygienic to use soap to clean hands and other hygiene without contact.
This Auto Soap Dispenser Container is a sensor foam soap dispenser under IFAN. The color is white, the body part is translucent, and the IFANPLUS logo is printed. The IFANPLUS packaging is made of ABS plastic and has a capacity of 1000ml.
Product Size：
Size(mm) | PCS/CTN | Weight(g/pcs) | CTN SIZE |
11*10*16.5 | 20 | 500 | 0.06 |
Product Features:
The Auto Soap Dispenser Container generally includes a liquid outlet faucet fixed on the countertop, a soap liquid bottle set under the countertop, a liquid discharge mechanism for discharging the soap liquid in the soap liquid bottle, and a pressure button for driving the liquid discharge mechanism. Wait. Generally, the soap dispenser is matched with the sink and installed near the faucet of the sink. When installing the soap dispenser, you need to check whether the sink has a soap dispenser hole, otherwise it cannot be installed. There are many types of Auto Soap Dispenser Containers, and there are also many colors of soap dispensers. You can choose different colors of soap dispensers according to different places. Some soap dispensers on the market are made of stainless steel. The standard color of stainless steel can generally be divided into stainless steel bright color and stainless steel brushed color. Bathrooms in five-star hotels choose stainless steel bright color, and high-end clubs can choose stainless steel red.
In terms of functions, the Auto Soap Dispenser Container can be divided into two functions: lockable and lockless: it is more appropriate to choose a non-locked soap dispenser for hotel rooms; a hotel bathroom can choose to have a lock to prevent the waste of soap. The size of the soap dispenser: The size of the soap dispenser determines the amount of soap that can be held. This can be based on actual needs. Choose a product with a suitable size.
Troubleshooting Auto Soap Dispenser Container
If the Auto Soap Dispenser Container is idle for a period of time, some soap may condense in the Auto Soap Dispenser Container. If the amount of soap is small, just stir it with warm water. This will restore the soap to liquid. If the above method is not feasible, put the condensed Remove the soap, add warm water, and use the soap dispenser several times until the warm water runs out of the soap dispenser, which will clean the entire soap dispenser. Please note that dust and impurities in the soap will block the liquid outlet. If you notice that the soap in the inner bottle has deteriorated, please replace the soap. If the soap liquid is too thick, the soap dispenser may not be out of liquid, in order to dilute the soap liquid, you can add a little water and stir it before use. When using the product for the first time, add clean water to discharge the vacuum inside. When adding soap solution, the inner bottle and pump head may contain some clean water when using the product for the first time. This is not a quality problem of the product, but the product leaves the factory. left over from previous inspections. With the improvement of soap dispenser technology, the Auto Soap Dispenser Container on the market, with its reasonable capacity design, can reasonably use up the soap within the shelf life, avoiding the occurrence of bad appeals.
