SS Shower Flexible Hose

Product Information：

SS Flexible Hose should pay attention to maintenance. Most of the shower hose leaks are related to improper use. The leaking areas are often the parts that are often bent by us. These parts are subject to huge force for a long time, so they are easily damaged. Therefore, when we use the shower, try not to bend it too much, and remember to hang it when not in use, so that the SS Flexible Hose can maintain a natural stretched state.

The operating temperature of SS Flexible Hose should not exceed 70°C. High temperature and ultraviolet light will greatly accelerate the aging of the shower and shorten the service life of the shower. Therefore, the shower should be installed as far away as possible from the heater and other electrical heat sources. The shower head cannot be installed directly under the Yuba, and the distance should be above 60cm. The shower hose should be kept in a natural stretched state, and do not coil it on the faucet when not in use. At the same time, be careful not to form a dead angle at the joint between the hose and the faucet, so as not to break or damage the shower hose.

Product Size：

What to do if SS Flexible Hose leaks？

Possible reasons: improper installation, deformation of the rubber ring, uneven or thin outlet pipe joints, and mismatch between the hose and the shower. Repair method: select the appropriate hose and shower according to the specifications, replace the rubber ring, and reinstall.

Possible cause: the hose is broken. Repair method: just replace with a new hose.

Possible reasons: improper adjustment, excessive foreign matter and scale. Repair method: rotate the shower nozzle to adjust it. If it still doesn't work, open the small round cap in the middle of the shower nozzle with a small flat-blade screwdriver, unscrew the screw with a Torx screwdriver, turn on the shower, rinse with clean water, brush the shower hole with a toothbrush, and then install and restore.