Angle Tap

Product Information：

This Angle Tap is an Angle Tap under IFAN, which is mainly used in daily life and can help us control the water switch. Angle Tap adopts a copper body and a ceramic valve core, which can be opened and closed easily, and is not easy to leak or rust.

The top of this Angle Tap is the valve switch, and the lower two ports are connected at right angles. One port is mainly used for connecting water pipes, and the other port is the water outlet. The valve switch on the top controls the water flow and volume of the water outlet.

Product Size：

The difference between the'nominal' size and the'outer diameter (OD)' size:

Nominal is a term used to describe most pipe and fitting measurements in the pipeline industry. Nominal refers to the measured value of the inner diameter of the pipe. Due to the difference in pipe wall thickness, the actual measured value in the pipe will be slightly different, so it is called "nominal", which means that the size change is small. The outer diameter (OD) size refers to the actual outer diameter of the pipe. The outer diameter of the pipe is a constant size, which allows the pipe fittings to be used with the same type of pipe with multiple wall thickness grades.

ABS:

Generally, in the plumbing industry (it is used a lot in the automotive industry because it is very durable), ABS refers to black plastic pipes and fittings used for drainage, sewer, waste, and vents. ABS (Acrylonitrile Butadiene Styrene) pipes/pipe fittings and PVC plastics have replaced most of the previous cast iron, lead and steel pipes. The most important point is that there is no solvent cement (and primer) that can completely "bond" (solvent welding) ABS to PVC plastic. Under normal conditions, high-quality ABS (when using virgin resin) will not crack, chip or peel.