Product Information：
Overview of the PEX Water Manifold integrated module for ground temperature regulation: It is suitable for project engineering and engineering transformation systems. It is integrated by the control center, divided into PEX Water Manifold, electric actuator box, etc., suitable for installation in the place of PEX Water Manifold! (About the installation location, first consider installing it in a place that is convenient for regulation, maintenance, and drainage. It is recommended to install it near the middle of the room, so that the length of each pipeline can be better controlled, so that the water flow of each pipeline is relatively uniform, which is beneficial to thermal efficiency the heating effect is better. In addition, for the semi-overfloor room type, it is suitable for installation at high or low places. For the duplex structure, it is suitable for installation on the corresponding unified main pipe of the upper and lower floors.)
How to know the valve switch of heating angle valves and PEX Water Manifold？
When heating, you need to pay attention to the switch of the valve. The heating valve is also called the angle valve. It is a valve with a handwheel. When the valve is opened, the valve is turned clockwise, and when the valve is closed, the valve is turned counterclockwise. If there is a sign, then if there is an arrow pointing, you can directly open it in the direction of the arrow.
Floor heating also has the integration of the home valve, the filter valve, and the small valves of the water divider. How do you look at the switch? In fact, there is a very simple way to distinguish, that is, when all the valve switch handles are along the pipeline，it is open.
