Pex One Way Valve

Description

Product Information：

Pipe Check Valve is mainly used in pipelines where the medium flows in one direction. It can automatically prevent the fluid (medium) from flowing back and only allow the medium to flow in one direction.

Product Size：

Installation of Pipe Check Valve:

First get the product to understand the role of each component, first assemble it without applying glue according to the renderings, and take it to the water pipe to compare whether the assembly is correct. Pay attention to install the check valve in the middle of the ball valve and the union. It is convenient for later cleaning and maintenance. Secondly, confirm the installation space. The downpipe is a bit long, which occupies the installation space and can be installed horizontally according to the section, so as to leave enough installation space for the full version of the package. Note that the product is sold separately, and can be installed according to your own actual installation. Flexible installation. Then, after confirming that it is correct, the glue can be installed. The check valve must be installed horizontally. When installing, pay attention to the side of the check valve with the arrow facing up, and the arrow pointing to the direction of the water flow. After the installation, the glue should be allowed to dry for 4 hours Test the water after left and right, (note that the glue cannot be changed after it is dry).

Precautions:

1. The straight-through lift check valve should be installed on the horizontal pipeline, and the vertical lift check valve should be installed on the vertical pipeline. The medium flows from bottom to top.

2. The installation position of the swing check valve is not limited by hand. It is usually installed on a horizontal pipeline, but can also be installed on a vertical pipeline or on an inclined pipeline.

3. When installing, pay attention to the flow direction of the medium should be consistent with the arrow shown on the valve body.