Product Information：
This Double Bibcock is one of the R series faucets. It is forged from brass. There are 9 R series faucets. This model is R05, which is similar to R04. The difference between the two is that the thread of R04 this model is a double internal thread, and the thread of Double Bibcock (R05) is a double external thread. Both R04 and R05 are faucets, but they can also be called shut-off valves, which can be used as shut-off valves to cut off the flow of water or adjust the flow of water.
Product Size：
Size(mm) | PCs/Box | Weight（g） | CBM |
1/2"（15/21 in French） | 100 | 185 | 0.0180 |
Product Features:
Each of our Double Bibcock has been individually tested to ensure the safety of the product. It is forged with brass. The brass has corrosion resistance, high temperature ductility and low magnetic permeability. It is equipped with a handle that can be manually controlled.
The shut-off valve is a commonly used shut-off valve, which is mainly used to connect or cut off the medium in the pipeline. It is generally not used to adjust the flow. The shut-off valve is suitable for a wide range of pressure and temperature, but is generally used for medium and small diameter pipelines.
The main standards of the globe valve are GB12233-89 "General Valve Iron Globe Valve and Lifting Check Valve", GB12235-89 "General Valve Flanged Steel Globe Valve and Lifting Check Valve", JB /T53174-94 "Quality Classification of Globe Valves", JB/T53165-92 "Quality Classification of High Pressure Balanced Raft Check Valves", GB/T587-93 "Marine Flanged Bronze Globe Valves", GB/1590-93 "Marine Flanged Cast Iron Globe Valve", GB8464-87 "General Technical Requirements for Internal Thread Connection Gate Valve, Globe Valve, Ball Valve, Check Valve", GB8465.2-87 "Internal Thread Connection Gate Valve, Globe Valve, Ball Valve, Check Valve Basic Dimensions Iron Stop Wait"
The difference between traps valve, traps and globe valves:
The water trap can drain the water condensed from the pipeline in time and recycle it, which not only ensures the safety of the pipeline but also saves energy. The most common type of steam trap made in China is the float type, and the most common type imported is polymetallic. The steam trap is mostly used in places where there is drainage at regular intervals or normally, because the steam trap can automatically drain, which is more convenient.
In many places in China that need to be drained when the equipment is turned on or off, the valves normally used for draining are collectively referred to as traps. The trap can be a globe valve or a ball valve. The most popular ones in China are globe valves. One door uses a pneumatic globe valve, and the second door uses a manual globe valve. There are also three-door types. When the equipment is started, because the pipe is gradually heated by steam, etc., it needs to be drained. Because of its good erosion resistance and sealing performance, the stop valve is used more in the power and chemical industry. During the normal operation of the equipment, because the pipeline has been kept overheated and the steam is constantly flowing, it will not be drained, so the trap can be kept closed in the normal state, and it does not need to be opened at ordinary times, and the price of the trap is also cheap. And easy maintenance.
