HDPE Pipe Socket Joint

Product Information：

This HDPE Pipe Socket Joint is a quick and easy connection joint of IFAN. It is mainly used for the connection between HDPE pipes and pipe fittings. It has the advantages of simple and convenient connection and easy disassembly.

HDPE Pipe Socket Joint consists of main body, pipe cap, snap ring, push ring and o-ring. Sliding water leakage; O-rings are made of NBR material, which has high elasticity, prevents sealing and is not easy to break. The connection method of HDPE Pipe Socket Joint: HDPE pipe fittings are known as "quick joints". When connecting, the first step is to put the PE pipe into the pipe cap, then put on the snap ring, plug the PE pipe into the thrust ring, then force the PE pipe into the O-ring, and finally tighten the pipe cap.

Product Size：

Product Features:

Transportation requirements for HDPE pipes: HDPE pipes have many precautions when handling and storing. Do not throw, roll or drag the HDPE pipe during handling, especially in winter, handle it carefully. When using mechanical equipment for hoisting and handling, use non-metallic ropes for hoisting. When transporting HDPE pipes, they should be placed on flat-bottomed vehicles with baffles or in flat cabins, and sharp objects that may be damaged should not be stacked; non-metallic ropes should be used to bind and fix, and sun and rain protection measures should be taken; pipes should be stored in In a well-ventilated warehouse or shed, keep away from heat sources when stacking.

HDPE pipes should be stacked horizontally on flat supports or on the ground. When straight pipes are stacked with triangular or rectangular piles, both sides are supported and protected, and the stacking height should not exceed 1.5m; when using layered shelves for storage, the height of each shelf should not exceed 1 meters, and the total stacking height shall not exceed 3 meters.