Product Information：
This 3 8 PEX Pipe Compression Fittings is a PEX pipe fitting under IFAN. The main function is that it can be applied to the connection between PEX aluminum-plastic pipes or floor heating pipes, which makes the connection between pipes more convenient and easy to install.
In fact, 3 8 PEX Pipe Compression Fittings is a kind of nut ferrule type fitting, which consists of four parts: nut, copper snap ring, O-ring and white sealing ring.
3 8 PEX Pipe Compression Fittings are mainly connected by the rotation of the nut, and an open C-ring is compressed. The C-ring is continuously closed with the tightening of the nut, and the pipe and the core of the pipe fitting are compressed to realize the connection. Its main feature is that it is easy to install and disassemble, easy to maintain, and does not require special tools during installation. The disadvantage is that if the nut is not tightened, there will be leakage, so extra attention is required during installation.
Product Size：
Size | PCS/Bag | Weight | CBM |
T16×1/2F×16 | 150 | 108 | 0.011 |
T16×3/4F×16 | 80 | 160 | 0.011 |
T18×1/2F×18 | 100 | 131 | 0.011 |
T20×1/2F×20 | 100 | 150 | 0.011 |
T20×3/4F×20 | 80 | 160 | 0.011 |
T25×3/4F×25 | 60 | 240 | 0.011 |
T25×1F×25 | 40 | 265 | 0.011 |
T26×3/4F×26 | 60 | 240 | 0.011 |
T26×1F×26 | 40 | 272 | 0.011 |
T32×3/4F×32 | 30 | 428 | 0.011 |
T32×1 F×32 | 30 | 435 | 0.011 |
Product Features:
3 8 PEX Pipe Compression Fittings used for long-term durability according to standards should not have too many problems, in fact, it mainly depends on the quality of pure copper. If there is no problem with the quality of pure copper (because it is thick enough), it can theoretically be used for more than long-term durability according to standards. However, the quality of maintenance methods for copper joints of floor heating pipes is generally low, and copper joints are relatively corrosion-resistant. It is generally recommended Use electroplated copper joints, that is, electroplating a layer of protective layer-nickel on the surface of the copper joints. Nickel is highly resistant to corrosion, which increases the life of the fittings and is environmentally friendly. The warranty period stipulated by the state is 16 months, and the specific service life depends on the material and process of the copper fittings, as well as the installation and use. If the copper standard is 63 copper and it has been dezincified, the installation also meets the standard, and the normal water supply temperature is no problem for 20 years. But if the copper content is too low and the installation is not up to standard, it's hard to tell. Therefore, in the process of use, attention should be paid to the maintenance process to reduce various use problems.
Maintenance method of copper joint of floor heating pipe：
3 8 PEX Pipe Compression Fittings Buried Protection: At present, PEX pipes already have reliable connection technology, which will not leak under normal circumstances. Anti-corrosion of floor heating copper joints: The copper joints of floor heating pipes must be added with a protective agent in the system. The maintenance method of copper joints of floor heating pipes should first consider various problems in the later stage. If the floor is too long, various bacteria and corrosive substances will be produced. It is very troublesome to do protection in the future, so be sure to be fully prepared when installing.
