Equal Elbow For PEX Pipe

Product Information：

This Equal Elbow For PEX Pipe is a pipe fitting used to connect PEX pipes. From the two ends of the interface, we can see that it can be directly connected with PEX pipes.

PEX pipe is what we usually call aluminum-plastic pipe, it is divided into aluminum and without aluminum, the biggest difference between these two types of aluminum-plastic pipe is whether it is with or without aluminum. PEX pipes with aluminum can be used as hot and cold water pipes, gas pipes, floor heating pipes, etc.; PEX pipes without aluminum are mainly used in floor heating systems and can be used as professional floor heating pipes.

Both ports of Equal Elbow For PEX Pipe can be connected with PEX pipe, and the caliber of the two ports is the same, that is, it is an equal-diameter copper joint. Please pay attention to its size and the same size when using it. The PEX tube is matched and connected.

Product Size：

Why use floor heating?

Floor heating is the abbreviation of floor radiant heating. It uses the entire ground as a radiator, and evenly heats the entire ground through the heat medium in the floor radiant layer, and uses the ground’s own heat storage and the law of heat radiation upward to conduct from bottom to top to achieve The purpose of heating. As the temperature gradient gradually decreases from the sole of the foot to the head is formed indoors, it gives people a comfortable feeling of warming the feet and the head. Ground radiant heating conforms to the fitness theory of "warm feet and coolness" in traditional Chinese medicine. It is a more comfortable heating method at present and a symbol of modern life quality.

Advantages of floor heating:

Comfortable, hygienic, and health care: radiant floor heating is a more comfortable heating method. The indoor surface temperature is uniform, and the room temperature gradually decreases from bottom to top, giving people a good feeling of warming feet and heads.

High efficiency and energy saving: The radiant heating method has higher thermal efficiency than the convection heating method. The heat is concentrated in the height that the human body benefits, and the heat loss during the transmission process is small.

Good thermal stability: The ground layer and concrete layer of floor heating have large heat storage and good thermal stability. Under the condition of intermittent heating, the indoor temperature changes slowly.

Long service life: Special solid PERT oxygen barrier plastic pipes are used for low-temperature ground heating to be buried underground, no scaling, no corrosion, unmanned destruction, and the service life is synchronized with the building.

Temperature controllability: Each household is equipped with an independent water collector and distributor for floor radiant heating, and each room is equipped with an independent control switch on the water collector and distributor. The control switch of the water collector and distributor can be used to control each room. Switch or temperature adjustment.

Use floor heating, dry ground, no dead corners indoors, and bacteria will not breed.

The composition of the floor heating system：

A complete low-temperature hot water floor radiant heating system should consist of gas wall-hung boilers, main pipes and their insulation, manifolds, thermoelectric valves, ground radiant pipes (or radiators), insulation reflective materials, pipe joints and thermostats, etc. It is composed of equipment and components, and the temperature can be set in different areas through the thermostat, and the indoor temperature can be automatically controlled. The thermostat with weekly programming can also set different temperatures in time periods according to the living habits of different families and individuals, and automatically turn on and off the heating system in advance.

Due to the short time for the system to enter the Chinese market, the rapid development of home floor heating systems in a short period of time has also caused a large number of unreasonable solutions in the floor heating market. Some companies cannot provide reasonable systems in order to save costs or are restricted by their own technical strength. Configuration. A reasonable floor heating system should be able to ensure the safety, comfort, energy saving, and stability of system operation. At present, the companies that operate home floor heating systems on the market have mixed good and bad. Most companies only equipped with gas wall-hung boilers, sub-catchments, ground radiant pipes (or radiators), and no other components are equipped, and they use poor-quality heat insulation reflections. Materials, etc., it seems that the initial investment is very small, but the operating costs and maintenance costs are staggering, the subsequent troubles are serious, the system runs for a long time, the heating effect is not only attenuated obviously, but the system is prone to failure, which affects the comfort effect of floor heating.