PEX Reduce Socket

Product Information：

This PEX Reduce Socket is one of the PEX Compression Fittings series of supporting products. It is mainly used for the connection of PEX pipes. It is a typical pipe joint. These pipe joints can be collectively referred to as pipe fittings.

This PEX Reduce Socket is available in two colors, the silver body and the golden pattern, the whole body is smooth and generous, using IFAN mold, IFAN packaging, the style is 01.

Product Size：

Product Features:

Advantages of PEX Reduce Socket: made of the best quality materials, easy to assemble, high flexibility, high and low temperature resistance, no internal scale, minimal thermal expansion, high-quality corrosion resistance, light and easy to transport, low expansion coefficient, oxygen airtightness and anti-diffusion properties, and will not produce a lot of noise.

The main advantage of PEX Reduce Socket is that it does not require specialized and expensive tools for complex connection operations, and no additional sealing is required. Product installation can be done through the threads on the accessories. As a result, we have obtained a tight and durable connection. It is very resistant to torsion, bending and tearing during operation, and it will be thickened where it is most easily damaged.

Other information:

Various designs for energy saving of household faucets:

Water-saving hydrants to avoid unconscious waste of hot water: Water-saving hydrants refer to hydrants that reduce primary energy consumption by reducing the amount of hot water used. They are divided into thermostatic hot water mixing hydrants and single-handle hot water hydrants. Mixed hydrants are mainly hydrants with manual water stop structures, hydrants with small flow spitting structures, and hydrants with a structure that gives priority to cold water. The highlight is that the flow rate adjustment and temperature adjustment are within the user's operating range.

The normal faucet handle is in the center position, which often represents mixed water. When it is turned on normally, the water heater will be ignited. The heat-saving faucet device will give priority to the cold water mechanism to prevent the water heater from running and mixing without knowing it. The dot is in the original position slightly ahead, which means that there is only cold water, which can avoid the waste of energy (gas or electricity, etc.) of the water heater.

In addition, the single-rod design can also effectively control the amount of water. The ECO valve core has two-section water control devices, which will not allow the water to be opened to the maximum at one time and cause waste.

Foam water outlet design: by injecting air into the water, the volume of water particles is increased, thus achieving the ideal water saving effect. Generally, the foam type water outlet uses more than two kinds of very fine shower holes, which evenly distribute each drop of water and make it more delicate, so that the washed dirt is easier to fall off, and the hand feels good, and it is easier to produce soap and other types of foam, which can be comfortable use.

Sensor faucet: Just place your hand on the upper sensor to turn on/off the water. In the power-saving mode, the sensor detects the time that the tableware and hands are placed under the faucet mouth to control the effective water output.