PEX Brass Conpression is mainly made of brass and used for pipe connection. Our product is integrally formed, with smooth surface quality and clear threads, which can be firmly connected to the pipeline, saying goodbye to the risk of leakage. Due to the choice of raw materials, it has better anti-corrosion and anti-rust properties, and is durable.
Compared with similar products using stainless steel and other raw materials, PEX Brass Conpression is more superior in terms of safety, hygiene, and economy. It is relatively hard, has the high strength of general metals, and has a certain impact resistance and greater endurance. And because of the choice of raw materials, it is safer and healthier, does not produce harmful substances, and can be used with confidence.
Details
Product name: brass conpression seated elbow
Material: brass material
Raw materials: 58-3 copper, cw617 copper
Advantages: fasteners, threaded connection, never leak
Connection method: threaded connection is mainly used, manual connection, tools can be used when necessary
Size: from 16mm to 20mm.
Application: PEX-AL-PEX pipe, PE-AL-PE pipe connection, etc.
Color: all white, all yellow, yellow and white
Product Information：
The ferrule has a seated inner tooth elbow, and the seated one is better adapted to the installation of turning. The base can be fixed on the wall for better installation and pipe laying. One end of the seated inner tooth elbow is connected to aluminum-plastic pipe. The other end is connected to the outer teeth.
Product features:
The pipe fittings are refined from high-quality copper materials;
Strong sealing performance, not easy to leak water, tight connection, and fast clamping.
Commodity use:
PEX Brass Conpression is suitable for the piping of building domestic water supply, central air-conditioning condensate, oxygen, compressed air, other chemical object transportation or vacuum systems and other industrial equipment piping systems.
Matters needing attention:
Pre-assembled parts of pipe fittings and pipe sections that can be pre-assembled should be assembled first. The connection of pipes and fittings adopts insert clamping type. First check whether the rubber gaskets and washers of the pipe fittings are complete, insert the pipe as tight as possible, and tighten it with a wrench. The threaded connection between the pipe fittings and the pipe fittings is the same as the galvanized pipe operation method, and 2 to 3 threaded wires should also be left.
The installation shall be in the order of main first, second second, first erect then support, layer by layer. The specific procedures are subject to the convenience of construction. Hang upright and tighten at any time. After the installation is complete, do a comprehensive quality inspection.
The quality of rubber pads and washers directly affects the tightness and durability of the pipeline, and its quality should be improved to reduce leakage.
