White Brass Racord Male

Send Inquiry
White Brass Racord Male
Details
Products Name:Racord Male/ male socket
Type:PEX Compression Fittings
Material:Brass
Place of Origin:Zhejiang, China
Category
Pex Compression Fittings
Share to
Description


Product Information:

White Brass Racord Male is a kind of pipe connection element, suitable for piping systems with multiple media. It is mainly composed of a nut, a white sealing ring, and a copper snap ring. It has a simple structure, strong airtightness, convenient use and beautiful appearance features. All White Brass Racord Males can be reassembled multiple times, but the parts must be undamaged and clean.



Product Size:

Size

M/Bag

Weight

CBM

S16×1/2"M

400

78

0.025

S18×1/2"M

320

105.5

0.025

S20×1/2"M

240

169

0.025

S20×3/4"M

240

172

0.025




Racord



Are ferrule joints and plug-in joints the same thing?

Plug-in joints are usually used to connect water pipes. When the pressure is high, if you don’t worry, put a clamp on the outside of the pipe; one end of the plug-in joint is inserted into the hose, and the other end can have many types of connection and sealing forms, such as the clamp type. A form of connection and sealing. So these two forms are not the same thing, but two connection forms, but sometimes they can be reflected on a single joint at the same time.

Aluminum-plastic pipe joints are divided into compression type and compression sleeve type. Generally speaking, the compression type is more stable in terms of sealing, but the compression type is a disposable product and the cost is higher.



How to connect the copper joints of aluminum-plastic pipes?

The copper joint is special for aluminum-plastic pipe, and it is designed with double sealing ring and special clamp, which has the function of sealing and tightening. The connection method is the same as the usual aluminum-plastic pipe. First put on the screw cap and the compression spring, then expand the pipe a little bit, then connect the pipe fittings and the hard pipe. -Point sealant. Note that the aluminum-plastic pipe must be cut flat and installed. After connecting with the gas, the foam of the detergent is applied to the joint to check for air leakage. As long as the mouth of the aluminum-plastic tube is slightly flared with a flaring device, the aluminum-plastic tube is directly inserted into the copper joint, and then the fastening nut is tightened to tightly and firmly connect with the aluminum-plastic tube.


Send Inquiry