PEX with Aluminum

Product Information：

This PEX aluminum pipe is smooth inside, non-corrosive, limescale free, 30% more flow than metal pipe. And it is easy to bend and can be installed directly around a column. It can be buried in walls and concrete with a simple metal detector. It can detect the installation location and is suitable for hot and cold water piping systems in industrial and civil buildings. It can also be used for indoor gas piping systems and solar air conditioning piping systems.

Product Size：

Product Features:

PEX with Aluminum piping is very popular in today's natural gas market. They have proven to be more cost effective and easier and faster to install than traditional natural gas piping, offering unparalleled features and advantages. The pipes have five layers, the innermost and outermost made of PEXB material with a layer of aluminum in between, each layer will be laminated with a layer of glue, i.e., bonded with hot melt glue, and can be used in professional underfloor heating systems.

Our PEX with Aluminum fittings are non-toxic and corrosion resistant. It is lightweight, mechanically and heat resistant. The tubing has low resistance to flow and very little scaling in the pipe, so the fluid is less likely to be contaminated. It can be 100% shielded from oxygen and completely prevented from permeation. If used as a shielding material for communication lines, it prevents magnetic interference. It is also resistant to static electricity and is suitable for gas and fuel transportation without restriction to bend or straighten.

FAQ

Pipeline connection: It can adopt various physical connection methods such as card sleeve type, compression type, sliding tight type, etc., which is convenient to install and disassemble.

Bend and straight pipe: The spiral pipe spring bending tool can be bent arbitrarily according to the construction requirements. It has the characteristics of easy bending, no rebound, small bending radius and convenient transportation. The advantage of the continuous tubes is that they can make the pipeline relatively long, reaching 100%. Each instrument can save installation time and connecting pipe fittings. However, the coil can only be used for small diameters, usually larger than 63 mm. Coiling is difficult, and transportation is also inconvenient, so it is rarely used in practice. Generally, straight pipes are used, which are not easy to bend, and are connected through pex pipe joints. The pipe fittings are complete in specifications and easy to construct.

PPR pipe and aluminum-plastic pipe: there is no difference between ordinary PPR pipe and aluminum-plastic pipe. The difference lies in the structure, pressure bearing capacity and high temperature resistance, so the two uses are different, which one is better and which one does not, it depends on the environment you use. If you use it for heating or in a very high temperature environment, use aluminum-plastic tubing. If it is only used for general water supply, ppr pipes are sufficient.