PEX Pipe with Aluminum Core

Product Information：

Pex Pipe With Aluminum Core is a very common type of home improvement pipe. The outer layer is a plastic layer, and the inner layer is an aluminum layer. It has the characteristics of temperature, pressure and corrosion resistance of plastic pipes, and metal pipes are easy to bend and flexible. The advantages of good performance and long service life.

Product Size：

Product Features:

Pex Pipe With Aluminum Core has an aluminum layer in the middle, which generally requires copper fittings to connect, and the connection method is threaded connection. The inner and outer layers of the aluminum-plastic pipe are made of special polyethylene materials, which are clean and non-toxic. The most important thing is that the middle layer of the aluminum-plastic tube is aluminum, which can not only block light, but also block oxygen. The environment of unhealthy microorganisms must be light and aerobic. The middle aluminum layer of the aluminum-plastic tube prevents the breeding of microorganisms and algae, which is beyond the reach of all-plastic tubes.

Because the inner layer of the aluminum-plastic composite pipe is made of aluminum, its connection method is different from plastic pipes such as ppr pipes. It generally uses threaded connection, and the pipe fittings are all made of copper. Two of our most common aluminum-plastic composite pipe connection methods, one is the card sleeve connection, and the other is the compression connection. The common pipe fittings of the card sleeve connection are equal diameter tees, equal diameter elbows, inner wire elbows and outer wire elbows. They are made of copper, and are precisely designed according to the national standard. They are corrosion-resistant, not easy to burst, and have a long service life. ; Card socket type interface, no need for professional tools, easy installation, tight connection and peace of mind.

You can use the card sleeve connection method to connect: 1. Cut the pipe, and cut the pipe to keep the port neat, hold it with your left hand, and cut it hard; 2. Put on the nut and C-ring, hold the pipe with your left hand, and put it on first Nut, C-ring, and round; 3. Insert the pipe into the upper pipe, hold both ends with both hands and insert the pipe to the end; 4. Tighten the nut, hold the left pipe with your left hand, and tighten the nut after alignment.

The common pipe fittings for compression connection are equal-diameter direct, equal-diameter elbow, and equal-diameter tees. They are made of brass, and the core is provided with three-stage serrated ring grooves to form a three-stage labyrinth-type seal. Structure to strengthen the sealing effect.