Product Information：
Aluminum Plastic PPR Pipe is a composite pipe that combines PPR raw materials and aluminum. It introduces advanced German pipe compounding technology, and combines PPR pipe and aluminum layer with the help of polymer binder (glue). It integrates PPR pipe Combined with the advantages of metal pipes, it has the sanitation, corrosion resistance, sealing performance of PPR pipes and the rigidity of metal pipes, so it has higher strength and better temperature resistance, and can be widely used in hot water, especially It is the field of high temperature radiator heating and central air conditioning.
Product features of Aluminum Plastic PPR Pipe: high compression resistance, high strength, high rigidity; good oxygen barrier and UV protection effect; thermal insulation and energy saving; good hygienic performance
Product Size：
SIZE | M/Bag | Weight (g/m) | CBM m³ |
20×3.4 | 200 | 174 | 0.092 |
25×4.2 | 140 | 268 | 0.092 |
32×5.4 | 80 | 436 | 0.092 |
40×6.7 | 60 | 660 | 0.092 |
50×8.4 | 40 | 1050 | 0.092 |
63×10.5 | 24 | 1750 | 0.092 |
Product Features:
How to simply judge the quality of Aluminum Plastic PPR Pipe: first look at the appearance, the good PP-R pipe is pure in color, no variegation, and has a matt color; the pseudo PPR pipe is slightly transparent or semi-transparent, such as adding recycled materials and waste. , The color of the products produced from the corner material is not soft and uniform; the second sound is that the PP-R pipe is duller, and the pseudo PP-R pipe is more crisp; the third burning smoke smells, mixed in the raw materials The PPR tube of recycled plastic and other impurities will emit black smoke and have a pungent odor, but the good material will not emit black smoke and odor after burning, and the molten liquid is still very clean after burning; the fourth melting, PPR The normal welding temperature during pipe welding is in the range of 260-290 °C, and the welding quality will be better guaranteed during welding within this temperature range. If the welding parameters are under normal welding parameters, the product can easily enter the welding die head during welding, and the welding piles up. If the tumor is close to liquid, it means that the product is not produced by authentic PPR raw materials. At the same time, if the welded accumulation tumor can be rapidly cooled and hardened (usually within 10 seconds), it can also indicate that the product is not produced by authentic PPR raw materials. This is because PPR One of its characteristics is that the heat preservation effect is better, and its cooling rate will naturally be slower. Then look at whether the inner diameter of the pipe is deformed and whether the pipe fittings are drawn. A good PPR pipe cannot be drawn, and the inner diameter is not easily deformed.
