Product Information：
This PPR Cross Tee is a PPR pipe fitting under IFAN. Its main function is to connect the PPR pipe and the pipe fitting. The regular colors of IFAN PPR Cross Tee fittings are green, white, gray, brown, etc., which can support color customization. The packaging of PPR Cross Tee is to use IFAN OPP bags in bulk, and then pack them into our IFAN color boxes for packaging.
Product Size：
SIZE | PCS/Bag | Weight (g/pcs) | CBM m³ |
20 | 400 | 25 | 0.057 |
25 | 300 | 43 | 0.057 |
32 | 150 | 65 | 0.057 |
40 | 80 | 108 | 0.057 |
50 | 50 | 168 | 0.057 |
63 | 40 | 253 | 0.057 |
Product Features:
Precautions for the use of PPR Cross Tee: PPR pipes and fittings are connected by hot melt, but they cannot be directly threaded on the pipes and fittings. Flange connections can be used when connecting with metal pipes, and tapes must be used when connecting with water heaters. Pipe fittings with metal inserts; in the process of hot-melt connection, be sure to use reliable hot-melt equipment, which can ensure the welding quality; when using special scissors to cut PPR pipes vertically, ensure that the incision is kept flat and free of burrs; PPR pipes and The welding part of the pipe fittings must be clean to prevent the sand and dust from damaging the quality of the joint; when inserting into the welding, the equipment must be heated according to the specified time; This position is wrong and needs to be adjusted accordingly in a certain period of time; after the PPR pipe connection is completed, you must hold the pipes and fittings with both hands to maintain sufficient cooling time, and you can let go and continue to install the pipes after cooling to a certain extent. White PPR pipe After the connection is completed, the specific location of the pipeline should be marked with colored paint on the wall or the ground to avoid damage to the pipe fittings again.
