PPR Male Thread Plug

Product Information：

This PPR Male Thread Plug is a PPR pipe fitting under IFAN, which is mainly used at the interface of the pipe to block the fluid. PPR Male Thread Plug is a pipe fitting used to block the excess nozzles in the middle of the pipe or at the end to prevent debris from entering the pipe. To play the role of a plug, it is necessary to select a plug that matches the inner diameter of the pipe.

Product Size：

Product Features:

PPR Male Thread Plug can be used in connection with PPR pipe. How to use the PPR pipe (welding step): The pipe must be cut so that the end face is perpendicular to the pipe axis, the burrs and burrs should be removed from the section of the pipe after cutting, and the connection end of the pipe and the pipe must be clean, dry and free of oil; the pipe should be marked with a special ruler and A suitable pen measures and marks the fusion depth at the pipe end; when heating the pipe and fitting, when the heat fusion welder is heated to 260°C (the indicator light turns green), push the pipe and fitting into the fusion splicer die at the same time.

The reasons for the blockage of the PPR pipeline: due to the lack of cleaning for a long time, the sludge and rust substances in the pipeline are formed and solidified, which causes the PPR pipeline to be directly small and block the flow rate of the water body; the acid and alkaline chemicals in the wastewater in the drainage pipeline cause long-term erosion and corrosion The pipeline will corrode the pipe wall; in daily life, improper use will cause foreign matter in the pipeline to pile up, and the pipeline will be blocked from time to time; Can explode.

PPR Pipeline Cleaning Method:

Chemical cleaning: Chemicals can be used to clean the pipeline. This method is carried out inside the pipeline, and there is no requirement for the shape of the pipeline. The speed is fast and the cleaning is thorough. When the pipeline is temporarily transformed, use the temporary pipeline and circulating pump station to carry out circulating chemical cleaning on both sides of the pipeline. High-pressure water cleaning: use high-pressure water pressure for injection cleaning inside the pipeline, and use high-strength and high-pressure high-pressure water jets for stripping cleaning. However, this technology has certain limitations. It can only be used for short-distance pipelines, and the diameter needs to be larger than 50cm to facilitate cleaning; PIG cleaner cleaning: rely on the driving force generated by the pump to push the fluid to drive the PIG cleaner to push forward in the pipe, removing the Dirt and debris accumulated on the inner wall of the pipe are discharged out of the pipe. PIG cleaning technology is widely used, and is suitable for cleaning projects such as various process pipelines, oil field oil and gas pipelines, etc., especially for pipeline cleaning of long-distance fluid transportation, and has an irreplaceable role in other technologies. There are various reasons for PPR pipeline blockage. During use, we should pay attention to the details of use, try to prevent dirt and debris from flowing into the pipeline, and clean it regularly.