Product Information：
The advantage of compression is anti-leakage, the development and research of compression pipeline, after years of experience tells us that the biggest advantage of compression is simple installation, prevent leakage!So if you want to eliminate leakage at home, you can choose compression pipe fittings!
Three clamping teeth, oxidation resistance, corrosion resistance, not easy to rust, stainless steel water pipe is suitable for a connection installation pipe, its use for different directions of water delivery to provide convenient conditions.
At the same time, in terms of the use of specifications, the commonly used specifications of the double clamping external wire three-way are DN15-DN100, the thickness is 0.8mm-2.5mm, users can choose the stainless steel double clamping external tooth three-way according to the size of the stainless steel pipe specifications and water pressure. Secondly, stainless steel double clamping wire three double clamping connection and external tooth live connection and stainless steel water pipe installation connection, can achieve fastening, sealing, stable effect, avoid the water hammer vibration, water pressure is too large brought by the interface loose, water leakage problems, reasonable maintenance and application of water resources.
A viega profi-press tee, which include: the main body, described the main body on the side of a fixed connection has two water pipe, two water pipe one located at the end of the main body, another is located in the upper main body in the end, make integral form an "F" type, two water tube cavity and the main body cavity, two water pipe runs outside of the opening of the sawtooth, two water pipe on the Mosaic have protectionThe protective sleeve is inlaid with a steel sleeve;The steel sleeve is provided with an observation hole;The serrated opening is also inlaid with a sealing ring.The utility model applies to a wide range of media.It can be used as a water distribution joint, radiator inlet and outlet water, room and room radiator connection, can also be used as a water collecting joint, but also as a mixing valve.
Matters needing attention:
When working, do not exceed the highest pressure of the tool, do not arbitrarily adjust the thin-wall stainless steel pipe clamp;
If the clamping connection is not in place, the tool should be repaired;
When connecting the thin-wall stainless steel pipe, the pipes at both ends must be on a horizontal line before clamping. After clamping, radial movement of the pipe connection is prohibited;
The crimping of DN65-DN100 pipeline shall be completed in three times, with the pressure of 20MPa, 40MPa and 60MPa respectively. Each time, the pressure will be unloaded, and the environment will be moved about 120° to be crimped again.
Installation and construction personnel must pass professional technical training, qualified rear can be on duty construction.
Product Features:
Product name: Clamping external tooth tee
Size: from 16 mm to 32 mm
Application: PEX-Al-PEX pipe, PE-Al-PE pipe connection, etc
Material: stainless steel or copper material
Sealing principle: rubber O-ring radial contraction tight
Connection mode: use special hydraulic tools for clamping connection
