PEX Overlap Pipe

Product Information：

This PEX Overlap Pipe is an aluminum-plastic pipe under IFAN. The color of this PEX Overlap Pipe is orange (if you need other colors, please feel free to consult us), it can withstand at least 60-75℃ water temperature, and can be used for general cold and heat water piping system, usually 100m per roll, conventional packaging is transparent film + ifan belt.

Product Size：

Product Features:

PEX Overlap Pipe has a long service life, with a long-term continuous service life of more than long-term durability according to standards under the working pressure of 1.0MPa; stable and uniform cross-linking, uniform inner and outer diameter of the pipe, uniform longitudinal and transverse wall thickness; high-strength pressure resistance, long-term durability of 85 ℃ water temperature, because it contains the aluminum layer of lap welding process, it can withstand the pressure range of 10 kg; the thermal conductivity is good, the thermal conductivity is 0.45w/mk, which is 1.5-2 times the coefficient of ordinary cross-linked polyethylene pipe, which is more conducive to the pipe and floor Heat transfer between the heating system, the heating system has higher thermal efficiency; the bending and non-rebound installation is faster, and it has the characteristics of easy bending and non-rebound. It is easy to lay the coil during the construction, and the positioning and fixing of the pipe are very easy, and the work efficiency can be greatly improved; The coefficient of thermal expansion is small, and the coefficient of thermal expansion is 2.5×10-5m/mk, which can avoid ground cracking or pipeline system damage due to large expansion and contraction of the pipe; The oxidative corrosion of corrosive components ensures the long-term normal operation and service life of the system; the inner wall of the pipeline is smooth and does not scale, streamlined design, small fluid resistance, low flow noise, reduce scale and avoid clogging; better high temperature heat resistance, Vicat The softening point is 131.5℃, and the working temperature can reach 95℃, which fully meets the requirements of the hot water system in the building water supply and drainage code; it is not brittle or damaged at low temperature. It can be constructed normally in winter at -40℃ and is easy to bend without damage. The hot-melt and mechanical connection is convenient and simple.