Product Information：
PVC Board Glue is a one-component new fully transparent solution glue. It is a special fully transparent PVC plastic glue product developed specifically to relieve difficult-to-stick transparent or white PVC plastic products. It can be used in plastics and plastics, plastics and metals, and plastics and non- Metal bonding or cross bonding difficulties.
The difference between this PVC Board Glue and other ordinary glues is that it is boxed instead of canned. Compared with canned glue, it is more portable.
Product Size：
Size(mm) | PCS/Box | Weight（g） | CBM |
50ml | 144 | 60 | 0.030 |
125ml | 144 | 159.5 | 0.080 |
Product Features:
Transparent PVC glue is a one-component glue, curing at room temperature, easy to use, high transparency, low odor and no whitening. The high-strength PVC adhesive is bonded with the good PVC material to form a whole, and it has the characteristics of acid and alkali resistance, aging resistance, and oil resistance. PVC Board Glue is specifically for the bonding of transparent PVC materials. This product complies with international environmental protection standards and has passed various professional tests.
The degumming method of PVC Board Glue:
PVC adhesive is a new one-component fully transparent solution glue, which is specially developed to relieve difficult-to-stick PVC plastic products. He can effectively solve the problem of adhesion between plastics and plastics, plastics and metals, and plastics and non-metals. There are five methods for degumming PVC adhesive. The first type is to drop the glue on the original place to melt the original glue; the second type is to melt with insulating oil; the third type is to clean and melt with acetone solution; the fourth type is to soak the small area of viscose directly with hot water ; Fifth, use a professional and efficient glue remover.
We can put a new drop of adhesive on top of the cooled raw glue, and then quickly wash it off with water. This is the easiest. Because this uses the temperature of a new drop of adhesive to melt the original glue; we can put a new drop of adhesive on top of the cooled original glue, and then quickly wash it off with water, which is the easiest. Because this is the temperature of the new drop of adhesive to melt the original glue; acetone solution can also degummed the PVC adhesive. Because PVC adhesive is a kind of resin glue, as long as it contains an organic solvent that dissolves the resin like acetone solution. However, it is worth noting that acetone is poisonous, so you must wear gloves and a mask when using it; for small areas of degumming, just soak in boiling water directly. Note that it must be soaked in boiling water; use a special high-efficiency glue remover . Drop it to the place where there is glue, wait for fifteen seconds, and scrub it with a cotton swab to see if there is any wire drawing. If there is, the glue has softened. Then add a drop again, wait three to five seconds, and then wipe it off.
