PVC Pipe Glue

Product Information:

This PVC Pipe Glue can be used for gluing PVC pipes and pipe fittings. Its use method is: clean up the surface of the adherend, such as oil, dust, etc., to keep it clean and dry; directly apply the glue to the two adherend surfaces evenly , Wait for 5~10 minutes. When the adhesive film is slightly non-sticky, when the hand feels dry, align the two adherends and apply a little pressure to make the adhesive surface tighter. Leave it for 1-2, 24 hours Achieve the use effect, reach the best bonding strength within 48 hours.

Reminder: If you need to improve the bonding strength and temperature resistance, you can pre-coat the treatment agent on the surface of the material, and then add about 5-8% of the curing agent to the glue and stir it evenly to achieve the bonding strength and temperature resistance. Significant improvement, such as thermal activation at 60-75°C for 4-7 minutes, the effect will be better. The glue added with the curing agent must be used up within 12 hours.

Product Size:

Precautions:

This category of products are flammable products, storage and transportation shall be handled in accordance with the flammable product rules;

Ventilate and ventilate during use, pay attention to safety, and operate away from fire sources;

Cover the container tightly after use to prevent the colloid from solidifying. If the glue is too thick, use appropriate amount of toluene and halogen instead of diluting.

Double-sided gluing is better than single-sided gluing.

Do not move the bonding surface easily, otherwise the air will enter and affect the strength.

Over time, it may corrode the metal container to a certain extent, making the adhesive look darker in color, but it does not affect the product performance.

This product should be sealed and stored in a cool place. The storage period is 1 year. When using the remaining glue, please use a small amount first, and then use it in large quantities.

Beware of inhalation and ingestion, and keep out of reach of children!