Product Information：
This Hand Dispenser Soap is a bathroom product under IFAN. It is transparent in color as a whole. It is made of ABS raw material and the surface is chrome-plated. The logo of IFANPLUS is printed on the body. It can hold about 250ml of soap.
Soap dispenser is a kind of sanitary ware commonly used in toilets. Its function is mainly to install near the sink to control washing products such as hand sanitizer and bath liquid. Used in public places such as homes, hotels, shopping malls, entertainment venues, etc., this Hand Dispenser Soap is a manual soap dispenser that presses the liquid out. The benefits of using soap dispensers are healthier and more hygienic, convenient to fix washing supplies, and good habits of washing hands frequently.
Product Size：
Size | PCS/CTN | Weight(g/pcs) | CTN SIZE |
5.8*7*20.5 | 100 | 220 | 0.12 |
Product Features:
Hand Dispenser Soap can be divided into three types according to different installation methods: sink type, display type and wall-mounted type. Among them, the wall-mounted soap dispenser is more suitable for bathroom use. The installation methods of the wall-mounted soap dispenser are divided into the following two types: punching installation It is the traditional screw drilling installation method. This installation method is relatively firm and has no requirements for the wall surface, but it will cause certain damage to the wall. When installing, choose a suitable drilling position, drive screws into the wall, and then install the rubber plug; then hang the backboard, tighten the nuts, hang the wall-mounted Hand Dispenser Soap on the backboard, and fasten it. Rabbit drilling installation is generally glued, the advantage is that it will not damage the wall, and it is relatively simple, you can install it yourself. The disadvantage is that it has certain requirements on the wall surface, and it is not suitable for painted walls, cement walls, and wallpaper walls. When installing, clean the wall, stick the screws tightly to the wall, discharge the air bubbles, then hang the soap dispenser on the backboard, and stick it on the screws of the screw stick together.
If you use the drilling installation method, you will drill holes in the wall because you need to fix it with screws. After the location is selected, you must determine the location of the drilling to avoid excessive damage to the wall. In order to strengthen the fixing effect, rubber plugs should be installed when installing the screws, which can also protect the wall holes from dropping slag and no longer expanding. If it is an automatic soap dispenser installed, after installation, check whether the motor wire and sensor head cable are connected well and whether the installation is tight; the power plug should be kept away from water sources to avoid safety accidents.
