Product Information：
This Water Manifold With Valves is a water manifold under IFAN and one of the HVAC products. HVAC includes three aspects: heating, ventilation, and air conditioning, which is called HVAC (Heating, Ventilating, Air Conditioning).
Water Manifold With Valves is a split water manifold. The water manifold is divided into two types: profile and forging: profile refers to the shape of the copper rod itself, which is directly cut for drilling and threading. It is generally split, and copper rods are compared. The thick one can also be directly made into one piece; forging means that the material copper rod is red punched according to the shape of the abrasive tool to obtain the same style as the profile, and then finish processing such as screw threading. The appearance will have a hexagonal shape, high and low, and generally made into one piece.
Product Size：
Size | M/Bag | Weight | CBM |
3/4*2 hole 16mm | 70 | 340 | 0.027 |
3/4*3 hole 16mm | 60 | 485 | 0.027 |
3/4*4 hole 16mm | 50 | 636 | 0.027 |
3/4*5 hole 16mm | 40 | 783 | 0.027 |
3/4*6 hole 16mm | 30 | 989 | 0.0272 |
Product Features:
Hand wheel combination of profile water separator: two-hand wheel, single-hand wheel, flow meter + hand wheel, electric heating actuator + hand wheel (or without the first round)
Two-hand wheel: the hand wheel for general control of the hot water part, which is used to switch, control the flow and adjust the temperature
Single-hand wheel: the hot water part has a hand wheel, the cold water part does not have a manual hand wheel, but it can also be adjusted and requires workers to use tools
Flowmeter + handwheel: The flowmeter mainly detects water pressure and flow (water flow per unit time). It can check whether the water pipe is blocked or not. The flowmeter part does not have the temperature adjustment function, so the cold water part must be equipped with manual Handwheel
Electric heating actuator + hand wheel (or without the first wheel): push-type adjustment, can be equipped with manual first wheel rotation adjustment, or without hand wheel, the customer directly installs the electric heating actuator control panel, and automatically adjusts according to the set temperature , If the customer is sure to install an electric heating actuator, there is no need to fix the handwheel, a protective cap is shipped with it, and it is directly removed during installation. The following part of the water separator can be equipped with a manual handwheel or not.
Forging double valve: Only one side of the water separator body needs to be punched, and it is directly equipped with a ball valve. The style is similar to the usual one. The size for HVAC is generally 1 inch.
The profile can also be made of stainless steel water separator: there are bamboo-shaped, round, etc.
