Some unexpected product quality problems often occur during the processing of PE pipes, usually caused by problems with machinery and equipment or raw materials. In the case of using PE pipes, there will be abnormal situations. According to the analysis of the reasons for the abnormality, the following suggestions are obtained: PE pipes can only be guaranteed in quality if they use products from well-known manufacturers; stabilizers are installed in front of each product to maintain the input The voltage is stable; the electric welding machine should be regularly checked and calibrated every year; the inner hole of the PE pipe and the connection hole of the pipe should be cleaned, dried and free of oil; when connecting, the non-rotating pipe end should be guided into the heat sleeve and inserted into the display The depth of the information, and the non-rotating tube is pressed on the thermal head to reach the specific display information position; the newly welded joint is prohibited from rotating. All in all, usually pay attention to the maintenance of PE pipes to avoid abnormalities. You also need to find a reliable manufacturer to buy. Don't buy cheap and shoddy goods.
