Some unexpected product quality problems often occur during the processing of PE pipes, usually caused by problems with machinery and equipment or raw materials. In the case of using PE pipes, there will be abnormal situations. According to the analysis of the reasons for the abnormality, the following suggestions are obtained: PE pipes should be used with products from well-known manufacturers, and the quality can be guaranteed. Please choose our products with peace of mind; Maintain regular inspection and calibration every year; clean, dry, and oil-free connection holes of PE pipes and pipes; when connecting, guide the non-rotating pipe end into the heat sleeve, insert it to the depth of the displayed information, and put the non-rotating pipe end into the heat sleeve. The rotating tube is pressed on the thermal head to reach the specific display information part. The heating time should take into account the requirements in the table above; the newly welded joint is prohibited from rotating. All in all, usually pay attention to the maintenance of PE pipes to avoid abnormalities.
