After buying a house, all kinds of problems in decoration come one after another, which is indeed something that cannot be delayed. If you haven't experienced these problems personally, you will feel very easy to solve. You may feel that as long as you hand over your house to a decoration company, all problems can be cured. In fact, it is not as simple as imagined, especially in water-heavy places like toilets, which need to be paid more attention.
Plumbing equipment is a necessary equipment in the home, and its importance is self-evident. In order to ensure a more comfortable life, many friends will install hot water pipes at home. However, if the correct method is not taken during installation, the following situation will occur - the water temperature in the cold water pipe is not too cold, and the water temperature in the hot water pipe is not very high. This situation will greatly reduce the quality of your life. So what is the reason for this? In fact, if the two water pipes are connected together, they will interfere with each other and seriously affect the quality of work. Therefore, when decorating the water pipes, we must pay attention to this problem, and we must keep the hot and cold water pipes at a certain distance. It should be noted that even if the area of the home is relatively small, a distance of more than ten centimeters should be maintained between the water pipes. If the area is too small, there is no condition to separate them, and heat-insulating materials should be selected to eliminate mutual interference as much as possible. influence between. There are also some residents who use the method of crossing the hot and cold water pipes for the aesthetics of the home, but this method is not very practical. When installing water pipes, be sure to ensure the intervals among them and pay attention to their practicality.
The comfort of the bathroom can improve the happiness index to a certain extent. After a reasonable layout, all the plumbing facilities can only be icing on the cake if they are in a comfortable size and perfect height.
The hot and cold water pipes under the countertop in the wash area should be set at a height of 40cm from the ground. Keep more than 10cm between the hot and cold water pipes, and try to avoid turning the water outlet, otherwise it will be easily blocked. The current sinks are generally connected with hoses, leaving about 0.5 meters on the ground. The main consideration is to buy a large sink, and the water should be left in the center of the basin 10 cm away from the wall.
The distance between the hot and cold water in the shower area is 15cm. When reserving the hot and cold water pipes, the thickness of the wall tiles should be considered. The pipe head needs to be 15mm-20mm higher than the rough wall. The water valve of the electric water heater can be 1.5 meters away from the ground.
The water supply pipe of the washing machine is about 1.2 meters above the ground. If it is long, it can be cut off. If it is short, it will be troublesome and must be connected again. The distance from the water outlet of the washing machine to the ground is about 1 meter if it is a fully automatic washing machine. If it is an old washing machine, 1.2 meters is the most suitable.
PPR pipe burial depth: Because the frozen layer in different places can be adjusted according to local conditions, generally it should be at least 0.3 meters deep from the ground concrete.
The toilet outlet should be 0.3 meters away from the ground, and then connect it with a hose.
