The following are the usage methods and precautions of PVC glue:
Usage methods:
Before using PVC glue, it is necessary to clean the surface of the PVC material to be bonded to ensure that the surface is clean, dry, and free of oil or dust.
Open the bottle cap and shake the PVC glue well to ensure that all parts of the glue are fully mixed.
Apply the glue evenly on the surface of the PVC material to be bonded, and immediately press the two surfaces together. Apply light pressure to ensure that the glue is evenly distributed and to avoid the formation of bubbles.
Use some pieces of paper or clean towels to place at the bonding site to apply uniform pressure. Maintain the pressure state to allow the glue to fully solidify, which usually takes 30 minutes to 1 hour.
After the glue is completely solidified, gently wipe off the excess glue with a clean cloth or sandpaper. Ensure that the bonding surface is clean and smooth to achieve the best effect.
Precautions:
It is necessary to store the PVC glue in a cool and ventilated place and prohibit contact with open flames.
When using PVC glue, if it is accidentally applied to the hands or clothes, it needs to be cleaned promptly with acetone.
