Home heating is a concealed concealed project. The heating host accounts for only 30%, and the remaining 70% is a concealed project composed of semi-finished products such as pipes, fittings, valves, etc. It is the key to quality! If you choose the wrong one, for example: poor construction technology, poor pipeline direction design, which affects the beauty; wooden floors, decorations, and furniture are damaged during the construction process; tap water pipes are used, which often sees water and gas. Therefore, the selection and connection of pipes are very important! It determines the safety of the overall system.
1. Mainstream Heating Supervisor—PEX
Super flexibility and memory can be bent directly without elbow connection, which improves construction efficiency and reduces hidden dangers and water resistance. Temperature resistance≥95℃
2. Mainstream floor heating pipe—PE-RT
Strong flexibility, can be bent directly without elbow, safe, low water resistance, it is an ideal floor heating coil
3. Mainstream water pipe-PPR
It cannot be bent directly, it must be connected by an elbow, usually by hot-melt connection
4. Sliding tight connection
There is no temperature or time requirement; it is not affected by the worker's operating level, and the pipe is completely embedded in the pipe fittings, leaving no hidden dangers; PEX with super flexibility and memory usually adopts a "slip-tight" connection.
5. Hot melt connection
Need to clean the surface of the pipe, mark the length of the connection, and master the melting temperature and time; affected by the melting temperature and melting time, it is greatly affected by the operation of the workers and the tools
